Based on this YouTube video's total view count of 110K views and industry-standard rates, the estimated total earning is $77 - $221 through ad revenue. Historical data is not yet available to calculate daily, weekly, or monthly averages.

Explore Subaru (Impreza, Forester, STI, WRX) Keyless Entry Key Fob Remote Programming with 110,326 views, 1,244 likes, and 132 comments. Experience the impact of this video content that has captured audience attention.

Please SUBSCRIBE and LIKE for more DIY auto help! Subaru (Impreza, Forester, STI, WRX) Keyless Entry Key Fob Remote Programming Subaru ForesterYears: 2009 2010 2011 2012 2013 Subaru ImprezaYears: 2008 2009 2010 2011 2012 2013 2014 Subaru STIYears: 2010 2011 2012 2013 2014 Subaru WRXYears: 2009 2010 2011 2012 2013 2014 Programming remote 1. Close all doors, trunk, gate 2. Open the driver’s door, sit in the driver’s seat, and close the door. 3. Perform the following steps within 45 seconds. (1) Open and close the driver’s door once. (2) Insert the key into the ignition switch, then turn it from the “LOCK” position to the “ON” position 10 times within 15 seconds. NOTE:  When you complete step (2), an electronic tone will sound once. If you do not perform steps (1) and (2) within 45 seconds, an error will occur. An electronic tone will not sound. In this event, perform the whole procedure again beginning with part 1. 4. Open and close the door once within 15 seconds. When part 4 of the procedure is completed, an electronic tone will sound for 30 seconds. If you do not perform the operations in part 4 within 15 seconds, an error will occur and the electronic tone will not sound. In this event, perform the registration steps again beginning with part 3 of the procedure. 5. Before the electronic tone stops sounding, press the lock side of the power door lock switch the same number of times as the leftmost digit of the transmitter code. For example, press the lock switch eight times if the leftmost digit of the code is 8. NOTE . The electronic tone will stop sounding when you start entering the number.  If you do not start entering the number using the lock switch before the electronic tone stops sounding, an error will occur. In this event, perform the registration steps again beginning with part 3 of the procedure. If the interval between one press of the switch and the next exceeds 5 seconds, an error will occur. In this event, perform the procedure again beginning with part 4. If an error occurs six times, perform the procedure again starting with part 3. 6. When you have finished entering the number, press the unlock side of the lock switch within 5 seconds. NOTE . An electronic tone will sound.  If you press the unlock side of the lock switch when more than 5 seconds have passed, an error will occur. In this event, perform the procedure again beginning with part 4. If an error occurs six times, perform the procedure again starting with part 3. 7. Perform parts 5 and 6 of the procedure for each of the remaining digits of the transmitter code beginning with the second digit (counting from the left) and finishing with the eighth digit. NOTE  When you finish entering the eighth digit, an electronic tone will sound for 30 seconds. If the interval between one press of the switch and the next exceeds 5 seconds, an error will occur. In this event, perform the procedure again beginning with part 4. If an error occurs six times, perform the procedure again starting with part 3. 8. Before the electronic tone stops sounding, use the power door lock switch to reenter the transmitter code beginning with the leftmost digit. If you do not start entering the number using the lock switch before the electronic tone stops sounding, an error will occur. In this event, perform the procedure again beginning with part 3. 9. When you have finished entering the code a second time, an electronic tone will sound for 1 second to indicate completion of registration, provided the code entered the second time is identical to that entered the first time. NOTE If the code entered the second time is not identical to the code entered the first time, an error will occur. In this event, perform the procedure again beginning with part 5. If an error occurs five times, perform the procedure again starting with part 3. 10. If you wish to program another transmitter code into the system (up to 4 transmitter codes can be programmed into the system), perform the procedure beginning with part 4. When you have finished programming all of the necessary transmitter codes into the system, remove the key from the ignition switch. 11. Test every registered transmitter to confirm correct operation.

With SocialCounts.org’s view counter, track your YouTube video’s live view count and YouTube likes count in real time with fast, reliable updates.

Watch every YouTube video live view count rise with our real-time YouTube views tracker—built for accuracy and minimal delay.

Follow YouTube real time views as they happen, using our dedicated view counter for YouTube videos.

Get up-to-date live view count on YouTube and see real-time growth with SocialCounts.org’s smart tracking tools.